Enterprise Solutions

Stop Check Modification

Enterprise SOAP API > API by Reference > Core Services > Stop Check Modification
Stop Check Modification

Stop Check Modification

Stop Check Modification is a jXchange service designed to provide a means to modify an existing stop hold record.

Message Flow

In jXchange, the Stop Check Modification service uses a typical exchange of MType messages to modify an existing stop hold record.

Primary Request

The third-party consumer forwards the StopChkModRq_MType message to the service provider.

The message contains the following simple elements:

  • Dlt
  • StopSeq

The message contains the following complex elements:

  • Custom_CType
  • InAcctId references AccountId_CType
  • MsgRqHdr_CType
  • StopChkInfo_CType

The message contains the following array:

  • ErrOvrRdInfoArray_AType

Primary Response

The service provider returns the StopChkModRs_MType message to the third-party consumer.

The message contains the following simple element:

  • RsStat

The message contains the following complex element:

  • Custom_CType

The message contains the following message element:

  • MsgRsHdr_CType

Stop Check Modification Behavior

The InAcctId complex and StopSeq element are required for the Stop Check Modification service.

A StopChkModRq_MType request message that provides the InAcctId complex, StopSeq element, and the Dlt element that contains true conveys to the service provider to remove the specific stop check record from the service provider.

The consumer can utilize the Stop Check Search service to obtain the stop sequence number for a stop check record.

The Stop Check Cancel service continues to exist as a valid operation unless otherwise noted.

StopChkModRq_MType

StopChkModRq_MType is a message MType element.

Contains:

  • Custom_CType
  • ErrOvrRdInfoArray_AType
  • InAcctId references AccountId_CType
  • MsgRqHdr_CType
  • StopChkInfo_CType

Simple Elements

The following simple elements are contained within this message.

ActIntentKey
The service provider key that is delivered to the consumer to be submitted in a subsequent modification operation.
Dlt
The delete element. Canonical values are:
  • false
  • true
StopSeq
Sequence number of the stop against an account. You may have multiple stops.

Custom_CType

Custom_CType is a complex CType element.

This element is optional.

ErrOvrRdInfoArray_AType

ErrOvrRdInfoArray_AType is an array AType element. This is an array of overrides for faults.

Contains:

  • ErrOvrRd_CType

ErrOvrRd_CType

ErrOvrRd_CType is a complex CType element. This element is used to override errors created in a previous request. This element is optional.

Simple Elements

The following simple elements are contained within this complex.

BusSvcType
The business service type used to convey certain Add and Mod message handling. The canonical value is NoValidate.
ErrCode
The error code.

InAcctId

AccountId_CType is a complex CType element. This element contains the incoming account identification information and any restrictions.

InAcctId references AccountId_CType.

Simple Elements

The following simple elements are contained within this complex.

AcctId
The number or character that identifies an account record.
AcctType
The number or character that categorizes the AcctId.
Rstr
The level of restrictions that can exist at a parent and/or child node. Canonical values are:
  • Hid
  • NoAccess
  • NoAccessPart
  • ReadOnly
  • ReadOnlyPart
  • ReadWrite
  • ReadWritePart

MsgRqHdr_CType

MsgRqHdr_CType is a complex CType element. This is the default message request header.

Contains:

  • AuthenUsrCred_CType
  • jXchangeHdr_CType

Simple Elements

The following simple elements are contained within this complex.

AuthenProdCred
Authentication of the Consumer Product Credentials in the form of a WS Security element that contains a single SAML V2.0 Assertion.

AuthenUsrCred_CType

AuthenUsrCred_CType is a complex CType element. This element represents authentication of the end-user credentials in the form of a WS Security element that contains a single SAML V2.0 Assertion.

Simple Elements

The following simple elements are contained within this complex.

Security
Defines the wsse:Security SOAP header element per section 4.

jXchangeHdr_CType

jXchangeHdr_CType is a complex CType element.

Simple Elements

The following simple elements are contained within this complex.

AuditUsrId
The user ID that the consumer would like written in the audit as performing the requested service. It varies, but it could be the same as the user ID. It is not used to authenticate. It is used to audit the Soap Header Fault.
AuditWsId
The workstation ID that the consumer would like written in the audit as performing the requested service for the Soap Header Fault. It varies, but it could be the same as the user ID.
AuthenUsrId
The user ID which the consumer would like the service provider to authenticate with for the Soap Header Fault. It is a user ID that the provider understands.

This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header SrchMsgRqHdr_CType and the Message Request Header MsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentials AuthenUsrCred_CType package is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.

BusCorrelId
The correlation identification as related to business functions and activities.
ConsumerName
The name of the service consumer (business name) for the Soap Header Fault.
ConsumerProd
The name of the product which is consuming the service (business product name) for the Soap Header Fault.
InstEnv
An identification provided by the consumer that defines the environment in which the institution is operating. Canonical values are:
  • Prod
InstRtId
The identification of the entity of the submitted message. A financial institution entity uses the routing transit or nine-digit number assigned to financial institutions for routing as assigned by the American Bankers Association. Any leading zeros must be provided for a complete routing and transit number. A non-financial institution entity should use a mutually agreed upon identification that must contain at least one non-integer character. The canonical value is JHA.

The element is required in all message requests.

jXLogTrackingId
An identification provided by jXchange to be able to trace the request and response of a message from the third-party gateway, internal gateway, and service provider for the Soap Header Fault.
JxVer
Contains the version jXchange is running for the Soap Header Fault.
ValidConsmName
The consumer name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table. The canonical value is: JHA.
ValidConsmProd
The consumer product name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table.
WorkflowCorrelId
The correlation identification as related to workflow functions and activities.
jXchangeHdr_CType Deprecation Details
AuthenUsrId
The user ID which the consumer would like the service provider to authenticate with for the Soap Header Fault. It is a user ID that the provider understands.

This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header SrchMsgRqHdr_CType and the Message Request Header MsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentials AuthenUsrCred_CType package is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.

StopChkInfo_CType

StopChkInfo_CType is a complex CType element.

Contains:

  • ApprvOffInfoArray_CType
  • Rmk_AType

Simple Elements

The following simple elements are contained within this complex.

ACHCompId
The ACH company ID.
ACHDrCRAll
ACH debit only, credit only, all.
ACHStdEntryClass
The ACH standard entry class.
AvlBalEffDt
The effective date when a stop hold should impact the available balance.
ChkDt
The check date.
ChkNumEnd
The numbers or characters that designate an ending point for check number selections.
ChkNumStart
The numbers or characters that designate a starting point for check number selections.
EffDt
The date assigned to transactions when it is different from the posting date.
ExpDt
The expiration date.
HighAmt
The value that designates an ending point for amount selections. Optional filter designating the amount to be used as the highest search criteria.
HldEntireBal
Determines if the entire account balance should be held.
LowAmt
The value that designates a starting point for amount selections. Optional filter designating the amount to be used as the lowest search criteria.
OffCode
The code that designates the financial institution officer.
PayeeName
The name of the payee.
PostAdvCode
The code that identifies the behavior for posting account transactions to the stop hold system.
RelAcctId
The related account ID or number.
RelAcctType
The related account type.
StopChg
Stop Charge. The fee to be charged for the stop payment.
StopNotCode
The code that defines the behavior for mailing stop hold notices.

ApprvOffInfoArray_AType

ApprvOffInfoArray_AType is an array AType element. This is an array of approval officers.

Contains:

  • ApprvOffInfoRec_CType
ApprvOffInfoRec_CType

ApprvOffInfoRec_CType is a complex CType element.

Simple Elements

The following simple elements are contained within this complex.

ApprvOffCode
The approving officer code.
ApprvOffDesc
The approving officer description.
ApprvType
The optional element contains the element name as defined in the enterprise dictionary and published as enterprise variables, which requires an officer approval. The service provider would convey the elements that could need approval by the Service Dictionary Search.

Rmk_AType

Rmk_AType is an array AType element. This is an array of application or user remarks in free form text.

Contains:

  • RmkInfo_CType
RmkInfo_CType

RmkInfo_CType is a complex CType element.

Simple Elements

The following simple elements are contained within this complex.

Rmk
Application or user remarks free-form text.

StopChkModRs_MType

StopChkModRs_MType is a message MType element.

Contains:

  • Custom_CType
  • MsgRsHdr_CType

Simple Elements

The following simple elements are contained within this message.

RsStat
The status of the response. Canonical values are:
  • Fail
  • Success

Custom_CType

Custom_CType is a complex CType element.

This element is optional.

MsgRsHdr_CType

MsgRsHdr_CType is a complex CType element. This is the default message response header.

Contains:

  • jXchangeHdr_CType
  • MsgRecInfoArray_AType

jXchangeHdr_CType

jXchangeHdr_CType is a complex CType element.

Simple Elements

The following simple elements are contained within this complex.

AuditUsrId
The user ID that the consumer would like written in the audit as performing the requested service. It varies, but it could be the same as the user ID. It is not used to authenticate. It is used to audit the Soap Header Fault.
AuditWsId
The workstation ID that the consumer would like written in the audit as performing the requested service for the Soap Header Fault. It varies, but it could be the same as the user ID.
AuthenUsrId
The user ID which the consumer would like the service provider to authenticate with for the Soap Header Fault. It is a user ID that the provider understands.

This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header SrchMsgRqHdr_CType and the Message Request Header MsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentials AuthenUsrCred_CType package is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.

BusCorrelId
The correlation identification as related to business functions and activities.
ConsumerName
The name of the service consumer (business name) for the Soap Header Fault.
ConsumerProd
The name of the product which is consuming the service (business product name) for the Soap Header Fault.
InstEnv
An identification provided by the consumer that defines the environment in which the institution is operating. Canonical values are:
  • Prod
InstRtId
The identification of the entity of the submitted message. A financial institution entity uses the routing transit or nine-digit number assigned to financial institutions for routing as assigned by the American Bankers Association. Any leading zeros must be provided for a complete routing and transit number. A non-financial institution entity should use a mutually agreed upon identification that must contain at least one non-integer character. The canonical value is JHA.

The element is required in all message requests.

jXLogTrackingId
An identification provided by jXchange to be able to trace the request and response of a message from the third-party gateway, internal gateway, and service provider for the Soap Header Fault.
JxVer
Contains the version jXchange is running for the Soap Header Fault.
ValidConsmName
The consumer name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table. The canonical value is: JHA.
ValidConsmProd
The consumer product name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table.
WorkflowCorrelId
The correlation identification as related to workflow functions and activities.
jXchangeHdr_CType Deprecation Details
AuthenUsrId
The user ID which the consumer would like the service provider to authenticate with for the Soap Header Fault. It is a user ID that the provider understands.

This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header SrchMsgRqHdr_CType and the Message Request Header MsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentials AuthenUsrCred_CType package is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.

MsgRecInfoArray_AType

MsgRecInfoArray_AType is an array AType element. This is an array of messages that can be returned in a response.

Contains:

  • MsgRec_CType
MsgRec_CType

MsgRec_CType is a complex CType element.

Simple Elements

The following simple elements are contained within this complex.

ErrCat
The Soap Header Fault error category.
ErrCode
The error code.
ErrDesc
The Soap Header Fault error description.
ErrElem
The Soap Header Fault when an error or fault occurs. This optional element contains the element which is causing the error condition.
ErrElemVal
The Soap Header Fault when an error or fault occurs. This optional element contains the value of the element which is causing the error condition.
ErrLoc
The Soap Header Fault error location. This is typically the program that generated the error condition.
Have a Question?
Have a how-to question? Seeing a weird error? Get help on StackOverflow.
Register for the Digital Toolkit Meetup where we answer technical Q&A from the audience.
Last updated Mon Jan 24 2022