Loan Liability Inquiry
Loan Liability Inquiry
Loan Liability Inquiry is a jXchange service that was designed due to provide a consumer with a service that conveys the guarantors and relationships to a loan.
Message Flow
In jXchange, the Loan Liability Inquiry
service uses a typical exchange of MType messages to convey the
guarantors and relationships to a loan.
Primary Request
The third-party consumer forwards the LnLiabInqRq_MType message to the
service provider.
The message contains the following simple element:
- CustId
The message contains the following complex elements:
Custom_CTypeInAcctIdreferencesAccountId_CTypeMsgRqHdr_CType
The message contains the following array:
IncXtendElemArray_AType
Primary Response
The service provider returns the LnLiabInqRs_MType
The message contains the following simple element:
- CustId
The message contains the following complex elements:
Custom_CTypeInAcctIdreferencesAccountId_CTypeMsgRsHdr_CType
The message contains the following array:
LnLiabInqRecArray_AType
Loan Liability Inquiry Behavior
The Loan Liability Inquiry message contains a documented choice statement at the root request.
The LnLiabInqRq_MType requires the submission of the
InAcctId_CType complex or the CustId simple element,
even though they contractually are optional. The InAcctId_CType takes
precedence over the CustId element when both are present in the
request.
The LnLiabInqRs_MType is an array of accounts that have a liability
relationship to the customer of the loan account. The CustId and
CurBal elements are required on the response.
LnLiabInqRq_MType
LnLiabInqRq_MType is a message
MType element.
Contains:
Custom_CTypeInAcctIdreferencesAccountId_CTypeIncXtendElemArray_ATypeMsgRqHdr_CType
Simple Elements
The following simple elements are contained within this message.
- CustId
- The identifier attached to a customer. It includes the OvrrdInstRtId attribute.
Custom_CType
Custom_CType is a complex CType element.
This element is optional.
InAcctId
AccountId_CType is a complex
CType element. This element contains the incoming account
identification information and any restrictions.
InAcctId references
AccountId_CType.
Simple Elements
The following simple elements are contained within this complex.
- AcctId
- The number or character that identifies an account record.
- AcctType
- The number or character that categorizes the AcctId.
- Rstr
- The level of restrictions that can exist at a parent and/or child
node. Canonical values are:
- Hid
- NoAccess
- NoAccessPart
- ReadOnly
- ReadOnlyPart
- ReadWrite
- ReadWritePart
IncXtendElemArray_AType
IncXtendElemArray_AType is an array
AType element.
Contains:
IncXtendElemInfo_CType
IncXtendElemInfo_CType
IncXtendElemInfo_CType is a complex
CType element.
Simple Elements
The following simple elements are contained within this complex.
- XtendElem
- Included extended elements. The consumer would ask by name for x_ prefix elements to be included in the response.
MsgRqHdr_CType
MsgRqHdr_CType is a complex CType element. This is
the default message request header.
Contains:
AuthenUsrCred_CTypejXchangeHdr_CType
Simple Elements
The following simple elements are contained within this complex.
- AuthenProdCred
- Authentication of the Consumer Product Credentials in the form of a WS Security element that contains a single SAML V2.0 Assertion.
AuthenUsrCred_CType
AuthenUsrCred_CType is a complex CType element. This element represents authentication of the end-user credentials in
the form of a WS Security element that contains a single SAML V2.0
Assertion.
Simple Elements
The following simple elements are contained within this complex.
- Security
- Defines the wsse:Security SOAP header element per section 4.
jXchangeHdr_CType
jXchangeHdr_CType is a complex
CType element.
Simple Elements
The following simple elements are contained within this complex.
- AuditUsrId
- The user ID that the consumer would like written in the audit as performing the requested service. It varies, but it could be the same as the user ID. It is not used to authenticate. It is used to audit the Soap Header Fault.
- AuditWsId
- The workstation ID that the consumer would like written in the audit as performing the requested service for the Soap Header Fault. It varies, but it could be the same as the user ID.
- AuthenUsrId
- The user ID which the consumer would like the service provider to
authenticate with for the Soap Header Fault. It is a user ID that the provider
understands.
This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header
SrchMsgRqHdr_CTypeand the Message Request HeaderMsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentialsAuthenUsrCred_CTypepackage is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security. - BusCorrelId
- The correlation identification as related to business functions and activities.
- ConsumerName
- The name of the service consumer (business name) for the Soap Header Fault.
- ConsumerProd
- The name of the product which is consuming the service (business product name) for the Soap Header Fault.
- InstEnv
- An identification provided by the consumer that defines the
environment in which the institution is operating. Canonical values are:
- Prod
- InstRtId
- The identification of the entity of the submitted message. A
financial institution entity uses the routing transit or nine-digit number
assigned to financial institutions for routing as assigned by the American
Bankers Association. Any leading zeros must be provided for a complete routing
and transit number. A non-financial institution entity should use a mutually
agreed upon identification that must contain at least one non-integer character.
The canonical value is JHA.
The element is required in all message requests.
- jXLogTrackingId
- An identification provided by jXchange to be able to trace the request and response of a message from the third-party gateway, internal gateway, and service provider for the Soap Header Fault.
- JxVer
- Contains the version jXchange is running for the Soap Header Fault.
- ValidConsmName
- The consumer name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table. The canonical value is: JHA.
- ValidConsmProd
- The consumer product name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table.
- WorkflowCorrelId
- The correlation identification as related to workflow functions and activities.
jXchangeHdr_CType Deprecation Details
- AuthenUsrId
- The user ID which the consumer would like the service provider to
authenticate with for the Soap Header Fault. It is a user ID that the provider
understands.
This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header
SrchMsgRqHdr_CTypeand the Message Request HeaderMsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentialsAuthenUsrCred_CTypepackage is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.
LnLiabInqRs_MType
LnLiabInqRs_MType is a message
MType element.
Contains:
Custom_CTypeInAcctIdreferencesAccountId_CTypeLnLiabInqRecArray_ATypeMsgRsHdr_CType
Simple Elements
The following simple elements are contained within this message.
- CustId
- The identifier attached to a customer. It includes the OvrrdInstRtId attribute.
Custom_CType
Custom_CType is a complex CType element.
This element is optional.
InAcctId
AccountId_CType is a complex
CType element. This element contains the incoming account
identification information and any restrictions.
InAcctId references
AccountId_CType.
Simple Elements
The following simple elements are contained within this complex.
- AcctId
- The number or character that identifies an account record.
- AcctType
- The number or character that categorizes the AcctId.
- Rstr
- The level of restrictions that can exist at a parent and/or child
node. Canonical values are:
- Hid
- NoAccess
- NoAccessPart
- ReadOnly
- ReadOnlyPart
- ReadWrite
- ReadWritePart
LnLiabInqRecArray_AType
LnLiabInqRecArray_AType is an array
AType element. This is an array of loan liabilities as
related to a customer or a specific loan.
Contains:
LnLiabInqRec_CType
LnLiabInqRec_CType
LnLiabInqRec_CType is a complex
CType element.
Contains:
AccountId_CTypePersonName_CType
Simple Elements
The following simple elements are contained within this complex.
- AcctRelCode
- The code that describes the relationship a customer has to an account.
- AcctRelDesc
- The description of the code that describes the relationship a customer has to an account.
- CurBal
- The current balance.
- CustId
- The identifier attached to a customer. It includes the OvrrdInstRtId attribute.
- LiabCurBal
- The current outstanding balance owed for a liability.
- LiabPct
- The liability percentage.
AccountId_CType
AccountId_CType is a complex
CType element. This element contains the incoming account
identification information and any restrictions.
Simple Elements
The following simple elements are contained within this complex.
- AcctId
- The number or character that identifies an account record.
- AcctType
- The number or character that categorizes the AcctId.
- Rstr
- The level of restrictions that can exist at a parent and/or child
node. Canonical values are:
- Hid
- NoAccess
- NoAccessPart
- ReadOnly
- ReadOnlyPart
- ReadWrite
- ReadWritePart
PersonName_CType
PersonName_CType is a complex CType
element. It contains name information. This complex is optional.
Contains:
X_PersonName
Simple Elements
The following simple elements are contained within this complex.
- ComName
- The common name. This is the full text line name like John Doe.
- FirstName
- The first name.
- LastName
- The last name.
- MiddleName
- The middle name.
X_PersonName_CType
x_PersonName_CType is a complex CType element.
Simple Elements
The following simple elements are contained within this complex.
- AbbName
- An abbreviated individual's or entity's name.
- LegalName
- Used by entities like trusts, or businesses in the case where
an individual is doing business as a company, or when the legal name is
different than the
ComName. - NameSuffix
- The name suffix. For examples, Jr. or MD.
- SalName
- A full text line name which is used in mailings. For example, Mr. and Mrs. John Doe.
- TitlePrefix
- The title prefix. Examples: Mr. or Mrs.
MsgRsHdr_CType
MsgRsHdr_CType is a complex
CType element. This is the default message response
header.
Contains:
jXchangeHdr_CTypeMsgRecInfoArray_AType
jXchangeHdr_CType
jXchangeHdr_CType is a complex
CType element.
Simple Elements
The following simple elements are contained within this complex.
- AuditUsrId
- The user ID that the consumer would like written in the audit as performing the requested service. It varies, but it could be the same as the user ID. It is not used to authenticate. It is used to audit the Soap Header Fault.
- AuditWsId
- The workstation ID that the consumer would like written in the audit as performing the requested service for the Soap Header Fault. It varies, but it could be the same as the user ID.
- AuthenUsrId
- The user ID which the consumer would like the service provider to
authenticate with for the Soap Header Fault. It is a user ID that the provider
understands.
This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header
SrchMsgRqHdr_CTypeand the Message Request HeaderMsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentialsAuthenUsrCred_CTypepackage is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security. - BusCorrelId
- The correlation identification as related to business functions and activities.
- ConsumerName
- The name of the service consumer (business name) for the Soap Header Fault.
- ConsumerProd
- The name of the product which is consuming the service (business product name) for the Soap Header Fault.
- InstEnv
- An identification provided by the consumer that defines the
environment in which the institution is operating. Canonical values are:
- Prod
- InstRtId
- The identification of the entity of the submitted message. A
financial institution entity uses the routing transit or nine-digit number
assigned to financial institutions for routing as assigned by the American
Bankers Association. Any leading zeros must be provided for a complete routing
and transit number. A non-financial institution entity should use a mutually
agreed upon identification that must contain at least one non-integer character.
The canonical value is JHA.
The element is required in all message requests.
- jXLogTrackingId
- An identification provided by jXchange to be able to trace the request and response of a message from the third-party gateway, internal gateway, and service provider for the Soap Header Fault.
- JxVer
- Contains the version jXchange is running for the Soap Header Fault.
- ValidConsmName
- The consumer name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table. The canonical value is: JHA.
- ValidConsmProd
- The consumer product name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table.
- WorkflowCorrelId
- The correlation identification as related to workflow functions and activities.
jXchangeHdr_CType Deprecation Details
- AuthenUsrId
- The user ID which the consumer would like the service provider to
authenticate with for the Soap Header Fault. It is a user ID that the provider
understands.
This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header
SrchMsgRqHdr_CTypeand the Message Request HeaderMsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentialsAuthenUsrCred_CTypepackage is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.
MsgRecInfoArray_AType
MsgRecInfoArray_AType is an array
AType element. This is an array of messages that can be
returned in a response.
Contains:
MsgRec_CType
MsgRec_CType
MsgRec_CType is a complex
CType element.
Simple Elements
The following simple elements are contained within this complex.
- ErrCat
- The Soap Header Fault error category.
- ErrCode
- The error code.
- ErrDesc
- The Soap Header Fault error description.
- ErrElem
- The Soap Header Fault when an error or fault occurs. This optional element contains the element which is causing the error condition.
- ErrElemVal
- The Soap Header Fault when an error or fault occurs. This optional element contains the value of the element which is causing the error condition.
- ErrLoc
- The Soap Header Fault error location. This is typically the program that generated the error condition.