Customer Information Message Inquiry
Customer Information Message Inquiry
Customer Information Message Inquiry is a jXchange service designed to provide the consumer with the ability to inquire on a customer or account identification informational messages.
Message Flow
In jXchange, the Customer Information Message Inquiry service uses a typical exchange of
MType messages to inquire on a customer or account identification
informational messages.
Primary Request
The third-party consumer forwards the CustInfoMsgInqRq_MType message to
the service provider. The message contains:
- CustId
- InclCustInfoMsg
Primary Response
The service provider returns the CustInfoMsgInqRs_MType message to the
third-party consumer. The message contains:
- CustId
Customer Information Message Inquiry Behavior
The CustInfoMsgInqRq_MType
request message requires the submission of the account identification or customer
identification, even though they contractually both are optional. The account identification
takes precedence over the customer identification when both elements are provided in the
CustInfoMsgInqRq_MType request message.
The CustInfoMsgInqRq_MType request message provides the
InclCustInfoMsg element that allows the consumer to request customer
level informational messages when making a request for the specific account identification.
The canonical values are true and false. The
default is false. The service provider ignores the element when
submitted with a request containing the CustId element.
The CustInfoMsgInqRs_MType response message encapsulates the
InfoMsgInqRecArray_AType array, which contains the account and/or customer
informational messages. The InfoMsgType element provides the key that
designates account or customer representation and is a required element. The canonical values
are Cust and Acct.
The InfoMsgOrder element provides the sequential order of the informational messages for the requested account and/or customer identification and references the Order element. This allows the service provider to convey to the consumer the service provider's preferential order of display.
CustInfoMsgInqRq_MType
CustInfoMsgInqRq_MType is a message
MType element.
Contains:
Custom_CTypeInAcctIdreferencesAccountId_CTypeMsgRqHdr_CType
Simple Elements
The following simple elements are contained within this message.
- CustId
- The identifier attached to a customer. It includes the OvrrdInstRtId attribute.
- InclCustInfoMsg
- Answers the question: Should the request for informational messages
include customer informational messages when requesting account identification?
Canonical values are:
- false
- true
Custom_CType
Custom_CType is a complex CType element.
This element is optional.
InAcctId
AccountId_CType is a complex
CType element. This element contains the incoming account
identification information and any restrictions.
InAcctId references
AccountId_CType.
Simple Elements
The following simple elements are contained within this complex.
- AcctId
- The number or character that identifies an account record.
- AcctType
- The number or character that categorizes the AcctId.
- Rstr
- The level of restrictions that can exist at a parent and/or child
node. Canonical values are:
- Hid
- NoAccess
- NoAccessPart
- ReadOnly
- ReadOnlyPart
- ReadWrite
- ReadWritePart
MsgRqHdr_CType
MsgRqHdr_CType is a complex CType element. This is
the default message request header.
Contains:
AuthenUsrCred_CTypejXchangeHdr_CType
Simple Elements
The following simple elements are contained within this complex.
- AuthenProdCred
- Authentication of the Consumer Product Credentials in the form of a WS Security element that contains a single SAML V2.0 Assertion.
AuthenUsrCred_CType
AuthenUsrCred_CType is a complex CType element. This element represents authentication of the end-user credentials in
the form of a WS Security element that contains a single SAML V2.0
Assertion.
Simple Elements
The following simple elements are contained within this complex.
- Security
- Defines the wsse:Security SOAP header element per section 4.
jXchangeHdr_CType
jXchangeHdr_CType is a complex
CType element.
Simple Elements
The following simple elements are contained within this complex.
- AuditUsrId
- The user ID that the consumer would like written in the audit as performing the requested service. It varies, but it could be the same as the user ID. It is not used to authenticate. It is used to audit the Soap Header Fault.
- AuditWsId
- The workstation ID that the consumer would like written in the audit as performing the requested service for the Soap Header Fault. It varies, but it could be the same as the user ID.
- AuthenUsrId
- The user ID which the consumer would like the service provider to
authenticate with for the Soap Header Fault. It is a user ID that the provider
understands.
This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header
SrchMsgRqHdr_CTypeand the Message Request HeaderMsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentialsAuthenUsrCred_CTypepackage is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security. - BusCorrelId
- The correlation identification as related to business functions and activities.
- ConsumerName
- The name of the service consumer (business name) for the Soap Header Fault.
- ConsumerProd
- The name of the product which is consuming the service (business product name) for the Soap Header Fault.
- InstEnv
- An identification provided by the consumer that defines the
environment in which the institution is operating. Canonical values are:
- Prod
- InstRtId
- The identification of the entity of the submitted message. A
financial institution entity uses the routing transit or nine-digit number
assigned to financial institutions for routing as assigned by the American
Bankers Association. Any leading zeros must be provided for a complete routing
and transit number. A non-financial institution entity should use a mutually
agreed upon identification that must contain at least one non-integer character.
The canonical value is JHA.
The element is required in all message requests.
- jXLogTrackingId
- An identification provided by jXchange to be able to trace the request and response of a message from the third-party gateway, internal gateway, and service provider for the Soap Header Fault.
- JxVer
- Contains the version jXchange is running for the Soap Header Fault.
- ValidConsmName
- The consumer name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table. The canonical value is: JHA.
- ValidConsmProd
- The consumer product name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table.
- WorkflowCorrelId
- The correlation identification as related to workflow functions and activities.
jXchangeHdr_CType Deprecation Details
- AuthenUsrId
- The user ID which the consumer would like the service provider to
authenticate with for the Soap Header Fault. It is a user ID that the provider
understands.
This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header
SrchMsgRqHdr_CTypeand the Message Request HeaderMsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentialsAuthenUsrCred_CTypepackage is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.
CustInfoMsgInqRs_MType
CustInfoMsgInqRs_MType is a message
MType element.
Contains:
Custom_CTypeInAcctIdreferencesAccountId_CTypeInfoMsgInqRecArray_ATypeMsgRsHdr_CType
Simple Elements
The following simple elements are contained within this message.
- CustId
- The identifier attached to a customer. It includes the OvrrdInstRtId attribute.
Custom_CType
Custom_CType is a complex CType element.
This element is optional.
InAcctId
AccountId_CType is a complex
CType element. This element contains the incoming account
identification information and any restrictions.
InAcctId references
AccountId_CType.
Simple Elements
The following simple elements are contained within this complex.
- AcctId
- The number or character that identifies an account record.
- AcctType
- The number or character that categorizes the AcctId.
- Rstr
- The level of restrictions that can exist at a parent and/or child
node. Canonical values are:
- Hid
- NoAccess
- NoAccessPart
- ReadOnly
- ReadOnlyPart
- ReadWrite
- ReadWritePart
InfoMsgInqRecArray_AType
InfoMsgInqRecArray_AType is an array
AType element. This is an array of information messages that provides general
information about the customer account.
Contains:
InfoMsgInqRec_CType
InfoMsgInqRec_CType
InfoMsgInqRec_CType is a complex
CType element.
Simple Elements
The following simple elements are contained within this complex.
- InfoMsg
- The informational message related to a customer or account.
- InfoMsgId
- The informational message identification related to a customer or account.
- InfoMsgOrder
- The order of informational messages related to a customer or account.
- InfoMsgType
- The type of informational messages related to a customer or
account. Canonical values are:
- Acct
- Cust
MsgRsHdr_CType
MsgRsHdr_CType is a complex
CType element. This is the default message response
header.
Contains:
jXchangeHdr_CTypeMsgRecInfoArray_AType
jXchangeHdr_CType
jXchangeHdr_CType is a complex
CType element.
Simple Elements
The following simple elements are contained within this complex.
- AuditUsrId
- The user ID that the consumer would like written in the audit as performing the requested service. It varies, but it could be the same as the user ID. It is not used to authenticate. It is used to audit the Soap Header Fault.
- AuditWsId
- The workstation ID that the consumer would like written in the audit as performing the requested service for the Soap Header Fault. It varies, but it could be the same as the user ID.
- AuthenUsrId
- The user ID which the consumer would like the service provider to
authenticate with for the Soap Header Fault. It is a user ID that the provider
understands.
This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header
SrchMsgRqHdr_CTypeand the Message Request HeaderMsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentialsAuthenUsrCred_CTypepackage is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security. - BusCorrelId
- The correlation identification as related to business functions and activities.
- ConsumerName
- The name of the service consumer (business name) for the Soap Header Fault.
- ConsumerProd
- The name of the product which is consuming the service (business product name) for the Soap Header Fault.
- InstEnv
- An identification provided by the consumer that defines the
environment in which the institution is operating. Canonical values are:
- Prod
- InstRtId
- The identification of the entity of the submitted message. A
financial institution entity uses the routing transit or nine-digit number
assigned to financial institutions for routing as assigned by the American
Bankers Association. Any leading zeros must be provided for a complete routing
and transit number. A non-financial institution entity should use a mutually
agreed upon identification that must contain at least one non-integer character.
The canonical value is JHA.
The element is required in all message requests.
- jXLogTrackingId
- An identification provided by jXchange to be able to trace the request and response of a message from the third-party gateway, internal gateway, and service provider for the Soap Header Fault.
- JxVer
- Contains the version jXchange is running for the Soap Header Fault.
- ValidConsmName
- The consumer name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table. The canonical value is: JHA.
- ValidConsmProd
- The consumer product name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table.
- WorkflowCorrelId
- The correlation identification as related to workflow functions and activities.
jXchangeHdr_CType Deprecation Details
- AuthenUsrId
- The user ID which the consumer would like the service provider to
authenticate with for the Soap Header Fault. It is a user ID that the provider
understands.
This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header
SrchMsgRqHdr_CTypeand the Message Request HeaderMsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentialsAuthenUsrCred_CTypepackage is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.
MsgRecInfoArray_AType
MsgRecInfoArray_AType is an array
AType element. This is an array of messages that can be
returned in a response.
Contains:
MsgRec_CType
MsgRec_CType
MsgRec_CType is a complex
CType element.
Simple Elements
The following simple elements are contained within this complex.
- ErrCat
- The Soap Header Fault error category.
- ErrCode
- The error code.
- ErrDesc
- The Soap Header Fault error description.
- ErrElem
- The Soap Header Fault when an error or fault occurs. This optional element contains the element which is causing the error condition.
- ErrElemVal
- The Soap Header Fault when an error or fault occurs. This optional element contains the value of the element which is causing the error condition.
- ErrLoc
- The Soap Header Fault error location. This is typically the program that generated the error condition.