Check Image Statement Generate Inquiry

Check Image Statement Generate Inquiry is a jXchange service designed to allow a consumer to check the status of a statement generation request.

Message Flow

In jXchange, the Check Image Statement Generate Inquiry service uses a typical exchange of MType messages to check the status of a statement generation request.

Primary Request

The Third Party Consumer forwards the ChkImgStmtGenInqRq_MType message to the Service Provider. The message contains:

  • Custom_CType
  • MsgRqHdr_CType
  • StmtStatId

Primary Response

The Service Provider returns the ChkImgStmtGenInqRs_MType message to the Third Party Consumer. The message contains:

  • Custom_CType
  • MsgRsHdr_CType
  • StmtId
  • StmtLoc
  • StmtLocCred_CType
  • StmtRqStat
  • StmtRqStatCmnt
  • StmtStatId

Check Image Statement Generate Inquiry Behavior

Use this service to determine if the statement generation is complete by inspecting the element StmtRqStat to see if Cmplt (Complete) is returned.

ChkImgStmtGenInqRq_MType

ChkImgStmtGenInqRq_MType is a message MType element.

Contains:

  • Custom_CType
  • MsgRqHdr_CType

Simple Elements

The simple elements contained within this message are listed below.

StmtStatId
The identification to use to find the status of a statement request.

Custom_CType

Custom_CType is a complex CType element.

This element is optional.

MsgRqHdr_CType

MsgRqHdr_CType is a complex CType element. This is the default message request header.

Contains:

  • AuthenUsrCred_CType
  • jXchangeHdr_CType

Simple Elements

The following simple elements are contained within this complex.

AuthenProdCred
Authentication of the Consumer Product Credentials in the form of a WS Security element that contains a single SAML V2.0 Assertion.

AuthenUsrCred_CType

AuthenUsrCred_CType is a complex CType element. This element represents authentication of the end-user credentials in the form of a WS Security element that contains a single SAML V2.0 Assertion.

Simple Elements

The following simple elements are contained within this complex.

Security
Defines the wsse:Security SOAP header element per section 4.

jXchangeHdr_CType

jXchangeHdr_CType is a complex CType element.

Simple Elements

The following simple elements are contained within this complex.

AuditUsrId
The user ID that the consumer would like written in the audit as performing the requested service. It varies, but it could be the same as the user ID. It is not used to authenticate. It is used to audit the Soap Header Fault.
AuditWsId
The workstation ID that the consumer would like written in the audit as performing the requested service for the Soap Header Fault. It varies, but it could be the same as the user ID.
AuthenUsrId
The user ID which the consumer would like the service provider to authenticate with for the Soap Header Fault. It is a user ID that the provider understands.

This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header SrchMsgRqHdr_CType and the Message Request Header MsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentials AuthenUsrCred_CType package is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.

BusCorrelId
The correlation identification as related to business functions and activities.
ConsumerName
The name of the service consumer (business name) for the Soap Header Fault.
ConsumerProd
The name of the product which is consuming the service (business product name) for the Soap Header Fault.
InstEnv
An identification provided by the consumer that defines the environment in which the institution is operating. Canonical values are:
  • Prod
InstRtId
The identification of the entity of the submitted message. A financial institution entity uses the routing transit or nine-digit number assigned to financial institutions for routing as assigned by the American Bankers Association. Any leading zeros must be provided for a complete routing and transit number. A non-financial institution entity should use a mutually agreed upon identification that must contain at least one non-integer character.

The element is required in all message requests.

jXLogTrackingId
An identification provided by jXchange to be able to trace the request and response of a message from the third-party gateway, internal gateway, and service provider for the Soap Header Fault.
JxVer
Contains the version jXchange is running for the Soap Header Fault.
ValidConsmName
The consumer name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table. The canonical value is: JHA.
ValidConsmProd
The consumer product name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table.
WorkflowCorrelId
The correlation identification as related to workflow functions and activities.
jXchangeHdr_CType Deprecation Details
AuthenUserId
This element deprecates in three years in accordance with XSD contract tenets. Effective date: 2012–01–01. The new complex element for user authentication credentials was added to the Search Message Request Header, SrchMsgRqHdr_CType, and the Message Request Header, MsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentials AuthenUsrCred_CType package is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.

ChkImgStmtGenInqRs_MType

ChkImgStmtGenInqRs_MType is a message MType element.

Contains:

  • Custom_CType
  • MsgRsHdr_CType
  • StmtLocCred_CType

Simple Elements

The simple elements contained within this message are listed below.

StmtId
The identification for a specific statement of an account on a specific date.
StmtLoc
URI where statement will be located, if created.
StmtRqStat
The statement request status. The canonical values are:
  • Cmplt
  • Err
  • Proc
  • Wait
StmtRqStatCmnt
A comment related to the status of the statement request.
StmtStatId
The identification to use to find the status of a statement request.

Custom_CType

Custom_CType is a complex CType element.

This element is optional.

MsgRsHdr_CType

MsgRsHdr_CType is a complex CType element. This is the default message response header.

Contains:

  • jXchangeHdr_CType
  • MsgRecInfoArray_AType

jXchangeHdr_CType

jXchangeHdr_CType is a complex CType element.

Simple Elements

The following simple elements are contained within this complex.

AuditUsrId
The user ID that the consumer would like written in the audit as performing the requested service. It varies, but it could be the same as the user ID. It is not used to authenticate. It is used to audit the Soap Header Fault.
AuditWsId
The workstation ID that the consumer would like written in the audit as performing the requested service for the Soap Header Fault. It varies, but it could be the same as the user ID.
AuthenUsrId
The user ID which the consumer would like the service provider to authenticate with for the Soap Header Fault. It is a user ID that the provider understands.

This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header SrchMsgRqHdr_CType and the Message Request Header MsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentials AuthenUsrCred_CType package is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.

BusCorrelId
The correlation identification as related to business functions and activities.
ConsumerName
The name of the service consumer (business name) for the Soap Header Fault.
ConsumerProd
The name of the product which is consuming the service (business product name) for the Soap Header Fault.
InstEnv
An identification provided by the consumer that defines the environment in which the institution is operating. Canonical values are:
  • Prod
InstRtId
The identification of the entity of the submitted message. A financial institution entity uses the routing transit or nine-digit number assigned to financial institutions for routing as assigned by the American Bankers Association. Any leading zeros must be provided for a complete routing and transit number. A non-financial institution entity should use a mutually agreed upon identification that must contain at least one non-integer character.

The element is required in all message requests.

jXLogTrackingId
An identification provided by jXchange to be able to trace the request and response of a message from the third-party gateway, internal gateway, and service provider for the Soap Header Fault.
JxVer
Contains the version jXchange is running for the Soap Header Fault.
ValidConsmName
The consumer name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table. The canonical value is: JHA.
ValidConsmProd
The consumer product name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table.
WorkflowCorrelId
The correlation identification as related to workflow functions and activities.
jXchangeHdr_CType Deprecation Details
AuthenUserId
This element deprecates in three years in accordance with XSD contract tenets. Effective date: 2012–01–01. The new complex element for user authentication credentials was added to the Search Message Request Header, SrchMsgRqHdr_CType, and the Message Request Header, MsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentials AuthenUsrCred_CType package is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.

StmtLocCred_CType

StmtLocCred_CType is a complex CType element.

This is the documented choice statement between the UsrName and UsrPswd elements.

Contains:

  • AuthenUsrCred_CType

Simple Elements

The simple elements contained within this complex are listed below.

UsrName
A user name assigned to a person.
UsrPswd
The password for the user.

AuthenUsrCred_CType

AuthenUsrCred_CType is a complex CType element. This element represents authentication of the end-user credentials in the form of a WS Security element that contains a single SAML V2.0 Assertion.

Simple Elements

The following simple elements are contained within this complex.

Security
Defines the wsse:Security SOAP header element per section 4.