Enterprise Solutions

Card Alert Subscriber Modification

Enterprise SOAP API > API by Reference > Card Services > Card Alert Subscriber Modification
Card Alert Subscription Modification

Card Alert Subscription Modification

Card Alert Subscription Modification is a jXchange service designed to provide consumers with the ability to establish EFT card alerts and controls.

Message Flow

In jXchange, the Card Alert Subscription Modification service uses a typical exchange of MType messages to allow consumers to establish EFT card alerts and controls.

Primary Request

The consumer forwards the CardAlrtSubModRq_MType message to the service provider. The message contains the following simple elements:

  • ActIntentKey
  • ComName
  • CustId
  • Dlt
  • EmailAddr
  • PhoneNum

Primary Response

The service provider returns the CardAlrtSubModRs_MType message to the consumer. The message contains the following simple element:

  • RsStat

Card Alert Subscription Modification Behavior

The Card Alert Subscription Modification service behavior is as follows.

The Card Alert Subscription Modification (CardAlrtSubModRq_MType) root request requires Customer Identification (CustId), EFT Card Array (EFTCardArray_AType), and Activity Intention Key (ActIntentKey).

Use the EFT Card Array (EFTCardArray_AType) to set the list of cards. For example, registration exists with cards A, B, and C. The modification request is sent with EFTCardNum = A, B, D. This would result in a replaced card list of A, B, D.

The Card Alert Subscription Modification (CardAlrtSubModRq_MType) optionally includes the Common Name (ComName), Email Address (EmailAddr), Phone Number (PhoneNum), and Delete (Dlt).

The Card Alert Subscription Modification (CardAlrtSubModRs_MType) root response returns Response Status (RsStat).

CardAlrtSubModRq_MType

CardAlrtSubModRq_MType is a message MType element.

Contains:

  • Custom_CType
  • EFTCardArray_AType

    This array is used to set the list of cards. For example, if a registration exists with cards A, B, and C, the request is sent with EFTCardNum = A, B, D. This request results in a replaced card list of A, B, D.

  • ErrOvrRdInfoArray_ATpe
  • MsgRqHdr_CType

Simple Elements

The following simple elements are contained within this complex.

ActIntentKey
The service provider key that is delivered to the consumer to be submitted in a subsequent modification operation.
ComName
The common name. This is the full text line name like John Doe.
CustId
The identifier attached to a customer. It includes the OvrrdInstRtId attribute.
Dlt
The delete element. Canonical values are:
  • false
  • true
EmailAddr
Email address.
PhoneNum
The phone number.

Custom_CType

Custom_CType is a complex CType element.

This element is optional.

EFTCardArray_AType

EFTCardArray_AType is an array AType element. This is an array of EFT cards.

Contains:

  • EFTCardRec_CType

EFTCardRec_CType

EFTCardRec_CType is a complex CType element.

Simple Elements

The following simple elements are contained within this complex.

EFTCardNum
The number that is assigned to an EFT card. The card number includes the ISO number.

ErrOvrRdInfoArray_AType

ErrOvrRdInfoArray_AType is an array AType element. This is an array of overrides for faults.

Contains:

  • ErrOvrRd_CType

ErrOvrRd_CType

ErrOvrRd_CType is a complex CType element. This element is used to override errors created in a previous request. This element is optional.

Simple Elements

The following simple elements are contained within this complex.

BusSvcType
The business service type used to convey certain Add and Mod message handling. The canonical value is NoValidate.
ErrCode
The error code.

MsgRqHdr_CType

MsgRqHdr_CType is a complex CType element. This is the default message request header.

Contains:

  • AuthenUsrCred_CType
  • jXchangeHdr_CType

Simple Elements

The following simple elements are contained within this complex.

AuthenProdCred
Authentication of the Consumer Product Credentials in the form of a WS Security element that contains a single SAML V2.0 Assertion.

AuthenUsrCred_CType

AuthenUsrCred_CType is a complex CType element. This element represents authentication of the end-user credentials in the form of a WS Security element that contains a single SAML V2.0 Assertion.

Simple Elements

The following simple elements are contained within this complex.

Security
Defines the wsse:Security SOAP header element per section 4.

jXchangeHdr_CType

jXchangeHdr_CType is a complex CType element.

Simple Elements

The following simple elements are contained within this complex.

AuditUsrId
The user ID that the consumer would like written in the audit as performing the requested service. It varies, but it could be the same as the user ID. It is not used to authenticate. It is used to audit the Soap Header Fault.
AuditWsId
The workstation ID that the consumer would like written in the audit as performing the requested service for the Soap Header Fault. It varies, but it could be the same as the user ID.
AuthenUsrId
The user ID which the consumer would like the service provider to authenticate with for the Soap Header Fault. It is a user ID that the provider understands.

This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header SrchMsgRqHdr_CType and the Message Request Header MsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentials AuthenUsrCred_CType package is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.

BusCorrelId
The correlation identification as related to business functions and activities.
ConsumerName
The name of the service consumer (business name) for the Soap Header Fault.
ConsumerProd
The name of the product which is consuming the service (business product name) for the Soap Header Fault.
InstEnv
An identification provided by the consumer that defines the environment in which the institution is operating. Canonical values are:
  • Prod
InstRtId
The identification of the entity of the submitted message. A financial institution entity uses the routing transit or nine-digit number assigned to financial institutions for routing as assigned by the American Bankers Association. Any leading zeros must be provided for a complete routing and transit number. A non-financial institution entity should use a mutually agreed upon identification that must contain at least one non-integer character. The canonical value is JHA.

The element is required in all message requests.

jXLogTrackingId
An identification provided by jXchange to be able to trace the request and response of a message from the third-party gateway, internal gateway, and service provider for the Soap Header Fault.
JxVer
Contains the version jXchange is running for the Soap Header Fault.
ValidConsmName
The consumer name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table. The canonical value is: JHA.
ValidConsmProd
The consumer product name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table.
WorkflowCorrelId
The correlation identification as related to workflow functions and activities.
jXchangeHdr_CType Deprecation Details
AuthenUsrId
The user ID which the consumer would like the service provider to authenticate with for the Soap Header Fault. It is a user ID that the provider understands.

This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header SrchMsgRqHdr_CType and the Message Request Header MsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentials AuthenUsrCred_CType package is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.

CardAlrtSubModRs_MType

CardAlrtSubModRs_MType is a message MType element.

Contains:

  • Custom_CType
  • MsgRsHdr_CType

Simple Elements

The following simple elements are contained within this complex.

RsStat
The status of the response. Canonical values are:
  • Fail
  • Success

Custom_CType

Custom_CType is a complex CType element.

This element is optional.

MsgRsHdr_CType

MsgRsHdr_CType is a complex CType element. This is the default message response header.

Contains:

  • jXchangeHdr_CType
  • MsgRecInfoArray_AType

jXchangeHdr_CType

jXchangeHdr_CType is a complex CType element.

Simple Elements

The following simple elements are contained within this complex.

AuditUsrId
The user ID that the consumer would like written in the audit as performing the requested service. It varies, but it could be the same as the user ID. It is not used to authenticate. It is used to audit the Soap Header Fault.
AuditWsId
The workstation ID that the consumer would like written in the audit as performing the requested service for the Soap Header Fault. It varies, but it could be the same as the user ID.
AuthenUsrId
The user ID which the consumer would like the service provider to authenticate with for the Soap Header Fault. It is a user ID that the provider understands.

This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header SrchMsgRqHdr_CType and the Message Request Header MsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentials AuthenUsrCred_CType package is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.

BusCorrelId
The correlation identification as related to business functions and activities.
ConsumerName
The name of the service consumer (business name) for the Soap Header Fault.
ConsumerProd
The name of the product which is consuming the service (business product name) for the Soap Header Fault.
InstEnv
An identification provided by the consumer that defines the environment in which the institution is operating. Canonical values are:
  • Prod
InstRtId
The identification of the entity of the submitted message. A financial institution entity uses the routing transit or nine-digit number assigned to financial institutions for routing as assigned by the American Bankers Association. Any leading zeros must be provided for a complete routing and transit number. A non-financial institution entity should use a mutually agreed upon identification that must contain at least one non-integer character. The canonical value is JHA.

The element is required in all message requests.

jXLogTrackingId
An identification provided by jXchange to be able to trace the request and response of a message from the third-party gateway, internal gateway, and service provider for the Soap Header Fault.
JxVer
Contains the version jXchange is running for the Soap Header Fault.
ValidConsmName
The consumer name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table. The canonical value is: JHA.
ValidConsmProd
The consumer product name that can be validated by enterprise governance. The canonical values are managed in a consumer/product enterprise table.
WorkflowCorrelId
The correlation identification as related to workflow functions and activities.
jXchangeHdr_CType Deprecation Details
AuthenUsrId
The user ID which the consumer would like the service provider to authenticate with for the Soap Header Fault. It is a user ID that the provider understands.

This element deprecates in accordance with XSD contract tenets. Effective date: 2017–01–01. The new complex element for user authentication credentials was added to both the Search Message Request Header SrchMsgRqHdr_CType and the Message Request Header MsgRqHdr_CType. AuthenUsrId is ignored by the service providers when the authentication user credentials AuthenUsrCred_CType package is delivered. The expectation is that the password credentials and the user name token are provided in the authentication user credential complex element in accordance with the standards established by WS-Security.

MsgRecInfoArray_AType

MsgRecInfoArray_AType is an array AType element. This is an array of messages that can be returned in a response.

Contains:

  • MsgRec_CType
MsgRec_CType

MsgRec_CType is a complex CType element.

Simple Elements

The following simple elements are contained within this complex.

ErrCat
The Soap Header Fault error category.
ErrCode
The error code.
ErrDesc
The Soap Header Fault error description.
ErrElem
The Soap Header Fault when an error or fault occurs. This optional element contains the element which is causing the error condition.
ErrElemVal
The Soap Header Fault when an error or fault occurs. This optional element contains the value of the element which is causing the error condition.
ErrLoc
The Soap Header Fault error location. This is typically the program that generated the error condition.
Have a Question?
Have a how-to question? Seeing a weird error? Get help on StackOverflow.
Register for the Digital Toolkit Meetup where we answer technical Q&A from the audience.
Last updated Mon Jan 24 2022